Product Specifications

For further information and to download an individual product specification PDF click on the model name

Model

Diameter of Pipe
(inches/mm)

Length of Pipe
(inches/mm)

Gallons
(per minute)

Material

Fitting Type

Integro™ 2 v1 2 / 50 24 / 600 55 304 SST (available in 316) NPT Threaded
Integro™ 2 v2 2 / 50 24 / 600 80 304 SST (available in 316) NPT Threaded
Integro™ 2 v3 2 / 50 24 / 600 105 304 SST (available in 316) NPT Threaded
Integro™ 3 3 / 80 24 / 600 233 304 SST (available in 316) ANSI Flange
Integro™ 4 4 / 100 36 / 900 402 304 SST (available in 316) ANSI Flange
Integro™ 6 6 / 150 36 / 900 805 304 SST (available in 316) ANSI Flange
Integro™ 8 8 / 200 36 / 900 1610 304 SST (available in 316) ANSI Flange
Integro™ 10 10 / 250 36 / 900 2550 304 SST (available in 316) ANSI Flange

Download All Models specification sheet here.

For pipe sizes over 10″/250mm in diameter please contact us to discuss further.

Integro™ General Information

  • Without water the Integro™ will generate a high voltage (but low amperage). Do not switch on the power until the installation is complete and the water flow has been restored.

  • The Integro™ is generally installed on your cold water main, within 6ft of an electrical source.

  • The maximum power (electricity) consumed per hour by each Integro™ is 0.039kwh.

  • The control box requires a standard power socket.

  • On all applications, to avoid pressure drops, the diameter of the Integro™ should be equal to, or greater than, the size of pipe it is being installed on.

  • You should not exceed the maximum water volume per minute for the Integro™, doing so will render it less effective.

  • The Integro™ is pressure tested to 150 PSI/10 Bar.

  • The standard operating temperature range for the Integro™ is 35° – 220°F / 2°C – 104°C.

  • All Integro™ models are single phase, 120 or 240v and 50/60Hz.

  • In the event that the Integro™ is not connected directly to an already grounded metallic pipe, a ground connector should be attached to the pipe of the Integro™ at the time of installation. This must be on an exposed stainless steel section, not over a painted section.

  • The control box is not intended to be located outdoors. If this is necessary, it should be enclosed in a suitable, well ventilated, housing.

Lifetime Warranty

Monthly Service Plan users benefit from a Lifetime Warranty for so long as the Service Agreement is in full effect. Any Integro™ systems that are purchased outright include a 5 year warranty. Full details of warranty coverage can be found in your Service Agreement. In the event that you believe the Integro™ unit is not functioning properly, you should contact us for further assistance.

Get in Touch

    For general questions and inquiries, please fill out the form below.

    *Indicates required field

    What is 8 x 7 ?