Our technology, the Integro, will help you:

  • Reduce your Energy Consumption and Costs

  • Prevent and Remove Limescale

  • Reduce Rust and Corrosion

  • Extend the Life of Critical Equipment

  • Reduce Levels of Waterborne Bacteria incl. Legionella

  • Improve your Water Quality

  • Lower your Carbon Footprint

Limescale forms in heating and hot water systems creating a layer of insulation between the heat source and water, effectively slowing down the process. Accumulating at a rate of 1-3mm per year (depending on your water hardness), this unwanted build-up can dramatically increase energy consumption. Just 1mm of scale increases energy use by up to 10%, with 6mm increasing consumption by as much as 40%.

This hard scale is more likely to accumulate on the hottest parts of a boiler, so these areas amass the thickest layer of scale, leading to localized overheating and permanent damage to the boiler. As well as scale formation, rust and corrosion can significantly reduce the life of heating equipment. Very often, these problems will not be realized until it is too late.

In order that energy costs are minimized and equipment maintenance is reduced, the priority must be to eliminate limescale permanently from your heating systems.

Whilst traditional water softening systems are one possible method of reducing limescale formation, they do not prevent it completely and do not remove existing build-up.

Periodic chemical treatment is often seen as the only answer to remove scale build-up from heat exchangers and boilers, but the environmental impact and expense of the chemicals, in addition to the downtime of the equipment, makes this a costly option.

The IntegroTM water restructuring technology offers a solution. It will eliminate limescale throughout your entire water system, as well as reducing rust and corrosion. Not only will it prevent all future limescale from forming, but it will also remove any historical build up from your water system and equipment, thereby reducing your costs and extending the life of critical equipment. It is maintenance and chemical free throughout its lifetime, offering an enormous saving in the time, expense, and increased carbon footprint involved in the routine upkeep of other systems. The benefits and savings mentioned above are realized in as little as 1-3 months after installation.

In short, you can lower your costs and help the environment by reducing your energy consumption and extending the life of critical equipment. Why would you not?

For more information please either call Rick Muir on 858-774-9377 or fill out the contact form below.

    For general questions and inquiries, please fill out the form below.

    *Indicates required field